Shop
Showing 1–24 of 132 results
-
HILUX REVO 15+, HILUX VIGO 05+, SUSPENSIONS by VEHICLE - TJM XGS, TJM
Suitable for: Ford Ranger PJ 12/06-03/09
656T100GP – GREASABLE PIN HILUX 05+
TJM XGS greaseable pin to suit Holden Colorado / Rodeo, Mitsubishi Triton, Nissan Navara and Toyota Hilux vehicles. Greaseable shackle pins allow regular greasing of bushes to reduce friction and operating temperatures and extend the lifecycle of bushes.
SKU: 656T100GP -
PRADO 90/SURF 185 (2 Sets), SUSPENSIONS by VEHICLE - TJM XGS, TJM
Suitable for: Toyota Prado 90 Series 06/96-02/03
770RS88A – 380PLJCAN20
Each TJM coil spring is made to our exact specifications. Designed and tested by local engineers our range incorporates a host of unique design features to suit your vehicle. This TJM XGS spring heavy-duty front pair suits Toyota Prado 90 Series with standard height. Our linear coils provide a regular spring rate that offers consistent suspension performance. TJM coil springs offer improved ground clearance and stability, optimum carrying capacity and ride comfort. Your original factory springs will often be subject to fatigue and reduced performance when subject to additional LBA weight or use in extreme environments.
SKU: 770RS88A -
HILUX VIGO 05+, SuperPro
12mm Adj SwayBar Link Kit 85mm (Z Link)
TRC1285L – 12mm Adj SwayBar Link Kit 85mm (Z Link)
12mm Ball Joint Adjustable Link
Minimum Length 140 mm – Maximum Length 170 mm
Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.Features & Benefits
- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip -;To get the best out of these adjustable link kits, please read the fitting instructions prior to installation.
- 45mm & 25mm long Thread
SKU: TRC1285L -
TJM, Uncategorized
8T SNATCH BLOCK
867TJMSBLOCK – SNATCH BLOCK 8T TJM
TJM snatch blocks effectively double the capacity of your winch. They are also useful in recovery situations where the winch anchor point is not in a direct line of the vehicle winching direction. This snatch block has an 8000kg workload load limit for up to 9.5mm cable. A greaseable nipple ensures smooth, trouble-free operation.
SKU: 867TJMSBLOCK -
SNORKELS, TJM
AIRTEC SNORKEL KIT BLACK POLYETHYLENE
Suitable for: Toyota Hilux 3/2005 – 7/2011
011SAT0187Z – SNORKEL TJM AIRTEC HILUX 05+ (VIGO)TJM Airtec snorkels are well sealed and with the air intake well above water level, to enable water crossings and all round improved air flow for your engine. This snorkel kit suits Toyota Hilux 2005 – 2015 petrol and diesel vehicles. Fitting a TJM Airtec snorkel means air supply is drawn from roof level providing cooler and cleaner air to the engine. This will help extend the life of the air cleaner element and reduce the wear of vital components. snorkels also assist with deep water crossings and provide hassle free air induction in dusty conditions.
SKU: 011SAT0187Z -
SNORKELS, TJM
AIRTEC SNORKEL KIT BLACK POLYETHYLENE
Suitable for: Toyota Hilux 09/2015 – 06/2018
011SAT0287D – SNORKEL TJM AIRTEC HILUX 15+ (REVO)
Give your vehicle a breath of fresh air with a TJM Airtec snorkel. This snorkel kit suits Toyota Hilux 09/ 2015+ narrow body models. Fitting a TJM Airtec snorkel means air supply is drawn from roof level providing cooler and cleaner air to the engine. This will help extend the life of the air cleaner element and reduce the wear of vital components. snorkels also assist with deep water crossings and provide hassle free air induction in dusty conditions.
SKU: 011SAT0287D -
SNORKELS, TJM
AIRTEC SNORKEL KIT WEDGETAIL BLACK POLYETHYLENE
Suitable for: Toyota Hilux 09/2015 – 06/2018
011SATW0187D – SNORKEL TJM AIRTEC WEDGETAIL HILUX 15+ (REVO)
Give your vehicle a breath of fresh air with a TJM Airtec snorkel. This wedge-tail snorkel kit suits Toyota Hilux 09/2015+ vehicles. A must-have upgrade for any 4WD enthusiast, our snorkels allow deep water crossings and hassle-free air induction when immersed in dust. In addition to 4WD benefits, our snorkels offer greater fuel efficiency and less air filter clogging by taking advantage of cooler and cleaner air at roof level compare to air at bonnet level. Our snorkels are designed and engineered in Australia for uncompromised performance.
SKU: 011SATW0187D -
240MM BLITZ, LightForce
BLITZ HALOGEN DRIVING LIGHT TWIN PACK – 12V
RMDL240T – 12V 100W XENOPHOT HALOGEN
The 240mm Blitz was our first true long distance light and began our reputation for high performance and light intensity. It was not long before it became a favourite in the heavy transport and freight industries worldwide. The combination of extreme light output, lack of vibration and durability made it standard equipment in many commercial fleets. If you desire long distance, power and value for money, the 240mm Blitz is a great choice.
SKU: RMDL240T -
240MM BLITZ, LightForce
BLITZ/XGT AMBER FILTERS-SPOT
FABD – BLITZ XGT 240MM – AMBER SPOT
Driving light filters can enhance vision when driving on or off-road. Various colours and output options are available for every road condition and environment.KIT INCLUSIONS
- 1 x Amber 240mm Blitz / XGT filter
SKU: FABD -
HILUX VIGO 05+, SuperPro
Control Arm Lower Assembly (Standard) – Pair
TRC471 – Control Arm Lower Assembly (Standard) – Pair
Complete Arm Assemblies with Standard SuperPro Bushings, Uprated Ball Joints & Camber Pins
The SuperPro Complete Lower Control Arm Kit will overcome the repair problems associated with seized lower inner camber bolts, worn ball joints and replacing the bushes.
The New SuperPro Roll Control Arm Kits are the ideal solution and come complete with:- Two Complete Arm Assemblies
- All SuperPro Bushings pre-installed
- Re-designed and Up-rated Ball Joints
- Up-rated Camber Bolts for four positions.
- Standard configuration
SKU: TRC471 -
HILUX VIGO 05+, SuperPro
Control Arm Upper Control Assembly (Ball Joint Adjustable)
TRC470 – Control Arm Upper Control Assembly (Ball Joint Adjustable)
Arms fitted with Uprated Ball joints and SuperPro Bushes to reduce Arm movement
Getting the correct alignment is no longer a problem.
Not only do these arms provide for better wheel alignment settings, they have been designed to include increased clearance between the arm and strut at full droop.
These arms deliver up to 3 degree of caster along with extra camber, allowing for the optimum alignment settings for a 2″ lifted vehicle.Key Features
- Increased articulation, perfect for the off road environment
- Provides for camber and caster adjustment using an adjustable ball joint
- Increased clearance between spring and Control Arm at full articulation
- SuperPro Bushings
- Made in Australia
SKU: TRC470 -
HILUX VIGO 05+, SuperPro
Control Arm Upper-Inner Bush Kit (Standard)
SPF2845K – Control Arm Upper-Inner Bush Kit (Standard)
Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations.;
Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.SKU: SPF2845K -
























